What is the Most Important Things for Choosing a Silo Vent Filter?
1: Stability and Sustainability:
The Silo Bin Vent is mostly installed on the high silo, tank and storage bins, it requires a robust and reliable filtration ability and stability. So, the maintenance time should be minimized.
Can you imagine there is a filter which do not need replace for 10-15 years?
ACMAN silo bin vent use Supra Polymer Sintered Filter, which is known as Sinter Plate Filter. Its robust rigid PE body has a long life time for about 10-15 years. It do not need shutting down time for the maintenance requirements at a high silotop.
Also, it do not has cages such as filter bags, The installation is also easy and convenient.
2: High Efficiency
The sinter plate surface filter provide a high efficiency filtration capability, thanks to its PTFE coating on a rigid PE matrix. The Efficiency could reach 1mg emission @1um dust powder.
Also, it could be used in the product collection.
Meet or Exceed government air quality regulations.
3: No Contamination and without Silicon
In some silos, the raw material can not be polluted. Normally, the bag filter and cartridge filters has fibers which could contaminate the materials.
But ACMAN's sinter plate filter do not has fiber risks, it meet FDA food standards requirements, so the sinter plate filter could keep the powder in the silo or tank clean actually.
In painting manufacturing process, the powder can not contact with the silicon which will making the painting peeling while painting on the wall. So, the painting factory should avoid other filters, and ACMAN's filters is most suitable for painting factories.
4: Air Tightness for Bin Vent Filters
In pneumatic conveying silo process, the air is pulling into the silo, and the silo became a positive pressure tank, the air venting and pressure relief could be crucial. In this occasion, The bin vent filter should become more air-tight and robust.
ACMAN provide high air tight silo bin vent, the leakage will less than 1%
5: Hydrophobic Filter-Suitable for Moisture Gas
In some storage silo occasions, the dust will with high moisture contained. Traditional filters has clog risks, but ACMAN sinter filter technology with hydrophobic characteristics could avoid the clogging problems, which suitable for the cement factory.
6: Filter Automatic Cleaning- Pulse Jet System
The pulse jet system using compressed air back flow to clean the filter automatically. Not similar with the shaking one, the cleaning efficiency and stability is high.
This system could making the filtration system working continuously, also minimize the maintenance and cleaning cost.
Silo Bin Vent Working Principles
Round Type Undertake More Pressure
The silo bin vent filter unit is a dust filtration machine on the top of silos or large bins. These storage silos for raw powder and bulk solids materials can be filled by pneumatic conveying systems from bulk tanker or by the bucket elevators . In order to avoid over-pressure in the silo and polluted to the environment, this powder and dust loaded airstream has to be filtration, so the material stays inside the silo and only clean gas exits the filter then emitting to the atmosphere. A fan to support the airflow. The Silotop is a special designed filter for silo venting process. This service-friendly bin vent filter has a pulse jet cleaning system that can be used for a wide range of bulk solids materials.
ACMAN Silo Top Vent Filter Technical Data
Cases in Some Industries
Silo Top Installation
Lithium iron phosphate
Vacuum Conveying Collector
Lithium iron phosphate
Inner PTFE Coating